I would like to know if there is a patch or an update will come out and more or less when it comes out
me gustaría saber si hay algún parche o saldrá alguna actualización y mas o menos cuando sale
[HELP] I can't connect my TX3 mini via Wi-Fi only via LAN
-
- Posts: 3
- Joined: Mon Nov 02, 2020 6:03 pm
-
- Posts: 3
- Joined: Mon Nov 02, 2020 6:03 pm
those are the photos of the plate from both sides I tried to get the best of it
esas son las fotos de la placa por los dos lados la trate de sacar lo mejor posible
modEDIT:
wi-fi chip info added
esas son las fotos de la placa por los dos lados la trate de sacar lo mejor posible
modEDIT:
wi-fi chip info added
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3
- Joined: Mon Nov 02, 2020 6:03 pm
And I would like to know if you can make compatible with the Screen of my Tx3 mini porq does not leave the time and those things
modEDIT:
LED display is not supported in atvX v4.
modEDIT:
LED display is not supported in atvX v4.
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
[mention]thomasruiz763[/mention] TX3 mini has newer revision CS_905W_TX_3D_V1.4 board, that comes with "unknown" 9012P wi-fi chip (no driver sources available).
Addendum:
There are also v1.4 boards with SP6360 (dual-band WiFi + Bluetooth) chip.
Addendum:
There are also v1.4 boards with SP6360 (dual-band WiFi + Bluetooth) chip.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3
- Joined: Sun Jan 10, 2021 9:50 am
I have tx3 mini 2020 version. I figured out it has a motherboard version 1.6 and probably it has 9012p wifi chip. The wifi is not working. Can anyone help me find the appropriate rom or driver for wifi chip?
You do not have the required permissions to view the files attached to this post.
-
- Posts: 2
- Joined: Sun Aug 27, 2023 10:47 am
hi all... newbie here!
I have a TX3 mini - worked on Wifi. I decided to update the firmware using the Tanix website...but now wifi has stopped working. Spent a day looking all over the internet and eventually found this page.
Can anyone provide me with a ROM for the box please that I can install using OTA - so stick a zip on a USB, put it in the box, get to android recovery > apply update from EXT > Update from udisk.....?
I don't have any special cables so really the only way I can update is this way.
Thank you so much in advance!
@Nayam @em3ka - I've seen your names pop up a lot on this forum - can either of you help pleeeease?
I have a TX3 mini - worked on Wifi. I decided to update the firmware using the Tanix website...but now wifi has stopped working. Spent a day looking all over the internet and eventually found this page.
Can anyone provide me with a ROM for the box please that I can install using OTA - so stick a zip on a USB, put it in the box, get to android recovery > apply update from EXT > Update from udisk.....?
I don't have any special cables so really the only way I can update is this way.
Thank you so much in advance!
@Nayam @em3ka - I've seen your names pop up a lot on this forum - can either of you help pleeeease?
- em3ka
- Moderator
- Posts: 1835
- Joined: Sun Jul 15, 2018 11:43 am
- Has thanked: 108 times
- Been thanked: 370 times
@mitzmitz , SP6330 wi-fi chip, not supported under atvX v4.xx FW, try with the Aidan's ROM.
Nope, you must using cable for install.