[phpBB Debug] PHP Warning: in file [ROOT]/ext/spaceace/ajaxchat/controller/chat.php on line 220: Trying to access array offset on value of type bool DDR Clock-Rate - atvXperience : The Forum
Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
For porting requests and questions about the compatibility of a certain device with atvXperience ROM, please perform the following test and add the current clock frequency value of your RAM to your request/question. Please specify the exact RAM memory type - DDR3/4, LPDDR3/4 etc. (exact marking of the RAM chip is required).
You can find the DDR Clk. Rate in the following ways:
[mention]mxfreak[/mention] if the DDR Clk Rate is incorrect then the tv box most times won't even boot, but if it does boot up and then the firmware seems to be operating and walking through mud at the same time with rampant crashes, that is usually sign DDR Clk Rate is close but not quite right. Remember though that the Terminal Clk Rate Test must be done with a functioning Stock/Factory Firmware to make a proper Rom Port.
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air GEARBEST.com PLEASE ENJOY ATVX!
hi, unpacking lately a lot of firmware to make compatible with my ram ddr 4 2400mhz, but is it enough to copy the 4 files or do I have to do anything else? because there are some roms where it shows the ram 2749 and other 2775mhz or other errors that do not connect to the playstore. also by changing the value of the ram am I going to lose the pre-loaded tweaks of the rom?
craser86 wrote: ↑Mon May 20, 2019 8:06 am
hi, unpacking lately a lot of firmware to make compatible with my ram ddr 4 2400mhz, but is it enough to copy the 4 files or do I have to do anything else?
If you refer to the other tutorial post about files to copy to make firmware compatible, then yes that is correct just those 4 files.
because there are some roms where it shows the ram 2749 and other 2775mhz or other errors that do not connect to the playstore
Where are you getting these MHz values from? If you install ram MHz value greater then the hardware specification of 2400 MHz you are going to have problems.
also by changing the value of the ram am I going to lose the pre-loaded tweaks of the rom?
The RAM setting applied through Bootloader won't affect any tweaks that are applied through system partition. But if you are talking about modifying the Kernel to adjust RAM, then do at your own risk, because I will recommend against trying to modify the kernel unless you fully understand the complexities of doing so.
BE KIND, BE NICE, BE RESPECTFUL TO OTHERS, RESPECT THE MODERATORS,
*IMPORTANT NOTE* ONLY PM MODERATORS OR DEVELOPERS AS A LAST RESORT!!!
My test device: H96 Pro+ 3gb/32gb DDR4 Plus own Tanix, Beelink, Alfawise, X96S, Odroid-N2, Khadas VIM3L, X3, ADT-3, X96-Air GEARBEST.com PLEASE ENJOY ATVX!
Yes you are right! I finally fixed the ram. I have a custom rom evolution mod, I would like to eliminate some useless scripts and apps that don't interest me. can i pass you the rom file can you take a look? Telegram?