[ROM] atvXperience v3wip - TX5 Pro and other devices

[Kebrapau]

Hi i'm new here

My device is a Sunvell T95X.
I've flashed the firmware, but I would like to go back to v2.
Since the bluetooth do not work and my remote is not working properly.
Is it possible?
I do not have a USB cable.
Can i do it from a SDCard?

Thanks in advance

[ricklar]

My device is a Sunvell T95X.
I've flashed the firmware, but I would like to go back to v2.
Since the bluetooth do not work and my remote is not working properly.
Is it possible?
I do not have a USB cable.
Can i do it from a SDCard?

Yes, can install v2F with SDcard method

[Kebrapau]

My device is a Sunvell T95X.
I've flashed the firmware, but I would like to go back to v2.
Since the bluetooth do not work and my remote is not working properly.
Is it possible?
I do not have a USB cable.
Can i do it from a SDCard?

Yes, can install v2F with SDcard method

I've tried, with the "toothpick" method but it always boots to the v3. Could you guide me.
Thanks

[ricklar]

I've tried, with the "toothpick" method but it always boots to the v3. Could you guide me.
Thanks

Install terminal app and type:

Code: Select all

reboot upgrade

(press enter)
Screen should go black,
Then insert upgrade SDcard.
Pray that works! If it does the SDcard update process should work and install firmware.

Alternatively you can enter Mask Rom mode my shorting the correct eMMC/Nand pins and then insert SDcard and it should also start the burn card process.

PLEASE!!! Review again the online tutorials to make sure you formatted and installed the firmware to SDcard correctly.

But you should really Buy a USBa-2-USBa cable and use AMLogic Burning Tool, it is the best way to install a firmware.

[Kebrapau]

I've tried, with the "toothpick" method but it always boots to the v3. Could you guide me.
Thanks

Install terminal app and type:

Code: Select all

reboot upgrade

(press enter)
Screen should go black,
Then insert upgrade SDcard.
Pray that works! If it does the SDcard update process should work and install firmware.

Alternatively you can enter Mask Rom mode my shorting the correct eMMC/Nand pins and then insert SDcard and it should also start the burn card process.

PLEASE!!! Review again the online tutorials to make sure you formatted and installed the firmware to SDcard correctly.

But you should really Buy a USBa-2-USBa cable and use AMLogic Burning Tool, it is the best way to install a firmware.

Thanks for your help.
I finally got it.

[AndreOtani]

Hi i'm new here

My device is a Sunvell T95X.
I've flashed the firmware, but I would like to go back to v2.
Since the bluetooth do not work and my remote is not working properly.
Is it possible?
I do not have a USB cable.
Can i do it from a SDCard?

Thanks in advance

Hi. did the wifi work in your tv box with this firmware?

[Kebrapau]

Hi i'm new here

My device is a Sunvell T95X.
I've flashed the firmware, but I would like to go back to v2.
Since the bluetooth do not work and my remote is not working properly.
Is it possible?
I do not have a USB cable.
Can i do it from a SDCard?

Thanks in advance

Hi. did the wifi work in your tv box with this firmware?

I didn't try it.

[lparker]

Hi guys,

Thanks for the hard work on this! Works perfect on TX5, except for one small bug. After about a day, I'm unable to open settings. When you select the gear cog in the top right, nothing happens. It did work for the first ~24 hours, as I was able to reboot and still open it normally. But when I tested it the second day it just didn't work. Thought it might be something isolated so I flashed it to another TX5 I have with the same result.

Let me know if there's anything I can provide to help find this bug.

[nmou88]

Tried with nexbox a95x but wifi and remote control didn't work

Will try with a mini m8s II and let you know when I have time

[wnocella]

Hi

I downloaded file from https://download.atvxperience.com/?dir=S905X

Is this latest version (last modified May 25th 2019 at 1:07am) ?

For Installation I burn it with usb burning tool?

Thanks

Stefano