[ROM] atvX v4 - AndroidTV 9.0 (S905X)

[mimmo_verdi]

...I saw that there are SKhinix and Samsung chips installed...

Find out witch are the RAM chips and search markings for memory type (DDR3/LPDDR3).

There are exactly 4 SKHynix H5TQ4G63AFR chips on the motherboard which, looking on the internet, appear to be DDR3 SDRAM ram chips
Also there is a Samsung KLMAG2GEND-B031 chip which should be the 16gb eMMC 5.0 chip

[em3ka]

looking on the internet, appear to be DDR3 SDRAM ram chips

OK, regular DDR3 memory, install non lpddr3 build that has drivers for your box wi-fi chip.

[Askari123]

I have a sunvell s905x box with RTL8723 wifi chip. Which rom should i use?

[amine90]

hello everyone, i recently purchased an mxq pro 4k 5g s905x ap6330 and i was wandering if i can flash the APXXXX wifi version or the ampak version
since i already tried the multiwifi version but i got not wifi
thanks in advance

[angascipione]

hello everyone, m9c max 4k box with s905x (the board inside is TX3 pro with 2GB ram + 16 GB storage) and i have installed atvx v4 multiwifi rom with Burning Tool and everything works fine except the wifi... dont know the wifi chip
i have attached 2 pics.
Can you please help and guide me to the compatible .img or something else that i need to do to get this wifi working! thx

[em3ka]

...dont know the wifi chip...

Realtek 8189FTV, install regular Realtek/SSV Wi-Fi version .img

[EuLa]

На vermax UHD 300x (S905X) прошил atvXperience_v4_S905X_RT_BCM.img
Не регулируется громкость приставки (именно приставки, не телевизора)
При этом исходная громкость слабая, приходится телевизор чуть ли не на максимальную громкость устанавливать
Пульт в порядке
Что тут можно сделать?

modEDIT:

Translation

SPOILER_SHOW

On Vermax UHD 300x (S905X) I flashed atvXperience_v4_S905X_RT_BCM.img
The volume of the set-top box is not adjusted (namely, the set-top box, not the TV)
At the same time, the initial volume is weak, you have to set the TV almost to the maximum volume
Remote is ok
What can be done here?

[kurinando]

I was hoping to revive an Z69 2/16G with Samsung memory. I'm now missing the download link for the ROM.

[em3ka]

...Z69 2/16G with Samsung memory ..... download link for the ROM.

Available on request.

[RuBeN16v]

Hello again after a long time, my box keep going really well, just something I wanted to know
Some news about how to make work the front display?
This days I have been trying diferent rooms but I always go back for ATVX