[HELP] How to unbrick TX3 Mini (Short pin photo included)

[em3ka]

I am not sure whether this is right or wrong.

Ask [mention]justin10[/mention] - OP will know at best, you have keep it shorted until device is detected in UBT.

[channdy]

I am not sure whether this is right or wrong.

Ask [mention]justin10[/mention] - OP will know at best, you have keep it shorted until device is detected in UBT.

[mention]justin10[/mention] please help me on getting my tx3 mini detected by UBT.

[diolybrabo]

The stock bootloader and stock kernel were not deleted. The reason for this could be the protection of the eMMC storage with a key (emmc protect key). I will compile a script that should remove the key protection..

I have the same hardware and problems, have you made the script yet? Many thx

Sorry friend. I'm facing the same problem until now. I'm waiting for a solution too.. If you discover something, please, let us know.

Good morning my friend, I speak here from Brazil, I am facing the same problem as yours, my wi-fi chip (RTL8723AS) is identical to yours and I am unable to find the room for our box anywhere, I would like to know if were you able to solve this problem?
If I have any evolution here I will post the result again!
Thank you very much in advance!

[andyxdtu]

I have the same hardware and problems, have you made the script yet? Many thx

Sorry friend. I'm facing the same problem until now. I'm waiting for a solution too.. If you discover something, please, let us know.

Good morning my friend, I speak here from Brazil, I am facing the same problem as yours, my wi-fi chip (RTL8723AS) is identical to yours and I am unable to find the room for our box anywhere, I would like to know if were you able to solve this problem?
If I have any evolution here I will post the result again!
Thank you very much in advance!

I have the rom, if you still need it just let me know.

Greetings form Mexico!

[bumerc]

Hello my friend, thanks for speaking!
But what good news, I do need it, if you can send it to me I will be very grateful!
I will leave here my contact email.

Please discuss private matters via PM, thx

[andyxdtu]

[mention]diolybrabo[/mention]
dude, send me a pm, i cant do it

[diolybrabo]

Hello my friend, thanks for speaking!
But what good news, I do need it, if you can send it to me I will be very grateful!
I will leave here my contact email.

Please discuss private matters via PM, thx

Sorry my friend!

[andyxdtu]

i can unbrick one of my tv boxes, unffortunely i have problems with a nother one, i do the sort pin method and flash the image, and aparrently its works but a few hours later it stop working and i have to do the whole thing again, any idea o solution?

[em3ka]

i have problems with a nother one

Which box ?

[diolybrabo]

i can unbrick one of my tv boxes, unffortunely i have problems with a nother one, i do the sort pin method and flash the image, and aparrently its works but a few hours later it stop working and i have to do the whole thing again, any idea o solution?

Everything OK my friend? First of all, I want to thank you for the help you gave me and for sending the file to me. It worked perfectly using the short method, I can record the room perfectly and start up normally. But I have this same problem as yours, working for a while after the box crashes and I have to redo the entire process navasi, I thought it was even a defect of the board but as you are with the same problem maybe it is some other problem! Again I want to thank you and all members of this post, any discovery I will post here. Thank you very much!