I don't see anything, post a photo from the CPU side of the board.
Z69 s905x 3gb 32gb firmware
-
- Posts: 3
- Joined: Sun Mar 20, 2022 5:54 pm
I flashed using the burning tool version 2.2.0.
- First I loaded the image and pressed "start".
- Then i shorted pins with a small screw driver an plugged it to the PC with USB male - male. (just tell me if you dont which pins are)
- Successfully flashed to 100% and led changed from RED colour to BLUE.
- First I loaded the image and pressed "start".
- Then i shorted pins with a small screw driver an plugged it to the PC with USB male - male. (just tell me if you dont which pins are)
- Successfully flashed to 100% and led changed from RED colour to BLUE.
I an you make a photo of the opposite side of the board please? From this side its identical to mine, but im not able to see the brand/manufacturer.
-
- Posts: 8
- Joined: Sun Oct 20, 2019 9:00 pm
Volpen wrote: ↑Mon Mar 21, 2022 7:29 pm I flashed using the burning tool version 2.2.0.
- First I loaded the image and pressed "start".
- Then i shorted pins with a small screw driver an plugged it to the PC with USB male - male. (just tell me if you dont which pins are)
- Successfully flashed to 100% and led changed from RED colour to BLUE.I an you make a photo of the opposite side of the board please? From this side its identical to mine, but im not able to see the brand/manufacturer.
I read about pins but wich version you install on this tv box
-
- Posts: 8
- Joined: Sun Oct 20, 2019 9:00 pm
-
- Posts: 3
- Joined: Sun Mar 20, 2022 5:54 pm
@montesumas I told you in my first message...montesumas wrote: ↑Tue Mar 22, 2022 6:36 am I read about pins but wich version you install on this tv box
Volpen wrote: ↑Sun Mar 20, 2022 7:05 pm in my case i downloaded the Elpida LPDDR3 Realtek/SSV version from here: viewtopic.php?t=2728