power key code from n5 is already integrated in our new atv9 version, please be patient
[ROM] Magicsee N5 - atvXperience v2 N5 Edition
-
- Posts: 5
- Joined: Sat Apr 18, 2020 9:46 pm
Hi [mention]bumerc[/mention] , I have exactly the same problem as [mention]kikko123[/mention] . My factory code is 0xfd020001 and I attach my remote.conf. Is there any guide how to include my "power_code" into the u-boot and repack the image? Than I may create the image myself. I have some Linux experience.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 1
- Joined: Sun Mar 10, 2019 5:47 pm
Hello, is there any plan to update it to Android 9 or is ATVX v4 for S905X already compatible?
I also checked the official firmwares for Magicsee N5 and there is one official Android 9. In case, the ATVX v2 is the last version, which is based on Android 7, how would performance be better?
Thanks in advance.
I also checked the official firmwares for Magicsee N5 and there is one official Android 9. In case, the ATVX v2 is the last version, which is based on Android 7, how would performance be better?
Thanks in advance.
-
- Posts: 1
- Joined: Thu Dec 31, 2020 1:52 pm
-
- Posts: 1
- Joined: Sun Dec 06, 2020 11:43 am
hi I uploaded the latest firmware from March to my N5
Magicsee N5 Edition - v2 but I have a problem with the video resolution while it works normally it goes away kl video then comes back I can't set a custom resolution since always 1080p 60hz can someone help me?
Magicsee N5 Edition - v2 but I have a problem with the video resolution while it works normally it goes away kl video then comes back I can't set a custom resolution since always 1080p 60hz can someone help me?
-
- Posts: 1
- Joined: Tue Mar 02, 2021 3:18 pm
Good day to all,
I'm using usb burning tool 2.1.7.3 and Magicsee N5_atvXperience v2_build.prop_OK.img, connecting usb cable to box on both usb ports whilst holding reset button, as per video instructions.
Can't seem to have installation starting on PC.
Any help?
thanks to all for the amazing job u guys are doing.
I'm using usb burning tool 2.1.7.3 and Magicsee N5_atvXperience v2_build.prop_OK.img, connecting usb cable to box on both usb ports whilst holding reset button, as per video instructions.
Can't seem to have installation starting on PC.
Any help?
thanks to all for the amazing job u guys are doing.